Seat Heater (Air Ventilation): Inspection
- Check for continuity and measure the resistance between terminals.
[Front]
[Rear]
No Description No Description 1 Heater (+) 3 NTC (-) 2 NTC (+) 4 Heater (-) Driver/Passenger NTC Sensor (± 5%) High 2.56 kΩ Middle 377 kΩ Low 5.43 kΩ - Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
Driver/Passenger Fabric (± 2%) Leather (± 2%) High 42/50°C 42/50°C Middle 39/45°C 39/45°C Low 36/40°C 36/40°C