Inspection Guide

Keep multifunction switch ON as low-beam, and see if the low beam works properly.

It the high beam works properly, the fault can be intermittent, so go to the verification of vehicle repair.

Courtesy of HYUNDAI MOTOR AMERICA

Corrective Measure

1. If the turn signal (direction indicator) doesn't work properly, replace TRUN LED module.
2. If the side repeater (lamp) doesn't work properly, replace the side repeater.
  - If it doesn't work properly after replacing the side repeater, check the wiring harness between head lamp module (ILCU) and side repeater (lamp).