Inspection Guide
- Keep multifunction switch ON as low-beam, and see if the low beam works properly.
- It the high beam works properly, the fault can be intermittent, so go to the verification of vehicle repair.
Corrective Measure
- It the high beam works properly, the fault can be intermittent, so go to the verification of vehicle repair.
-
- If the turn signal (direction indicator) doesn't work properly, replace TRUN LED module.
- If the side repeater (lamp) doesn't work properly, replace the side repeater.
- If it doesn't work properly after replacing the side repeater, check the wiring harness between head lamp module (ILCU) and side repeater (lamp).