Inspection Guide
- If the automobile high sensor is not calibrated, AFS will illuminate on cluster.
- Calibrate the automobile high sensor using GDS.
- If one automobile high sensor is installed, Calibrate automobile high sensor from LH controller.
- If two automobile high sensors are installed, Calibrate automobile high sensors from LH/RH both controller.
- During calibration of automobile high sensor, satisfy the condition listed below;
- Unload the whole baggage from the vehicle.
- Locate the vehicle on the level ground.
- With an occupant in driver's seat, calibrate the vehicle.
- See if AFS warning lamp is off.
- If AFS warning lamp keeps on, check the connection of automobile-high sensor (including road) and contact of connectors.
- After checking proper installation of automobile-high sensor, try "Inspection guide" again.