Operations For Guideline Steering Interlocking Indications

The indication for the guideline steering interlocking trace uses the steering wheel angle value periodically received by the SVM controller through C-CAN.

A rear area that displays a 130 degree image of the rear mode (two-split mode) and a wide view are displayed with the expected car movement trace.

1. View modes for guideline steering interlocking indications

   Mode	View	Notes
   Rear	Rear wide view + Top view	Courtesy of HYUNDAI MOTOR AMERICA
   	Rear top view + Top view	Courtesy of HYUNDAI MOTOR AMERICA
   	Rear corner view + Top view	Courtesy of HYUNDAI MOTOR AMERICA

2. Specifications for guideline steering interlocking trace lines

   Number	Distance	Color
   (1)	0.5 m	Red
   (2)	1 m	Yellow
   (3)	2.3 m	Yellow
   (4)	Bumper left side end + 0.3 m	Yellow
   (5)	Bumper right side end + 0.3 m	Yellow

   Courtesy of HYUNDAI MOTOR AMERICA

3. Indications for neutral trace lines

   If the steering angle is neutral, the neutral trace line is indicated in blue, which shows the expected movement trace of the car.

   This line is displayed with the guideline steering interlocking trace line and is also a fixed line that is not interlocked with the steering angle operation.