LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2022 >> GV80 3.5T Advanced+ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System - 2.5L) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the HO2S connector.
  3. Measure resistance between the HO2S terminals 4 and 5. [Bank 1/sensor 1]

    Measure resistance between the HO2S terminals 3 and 4. [Bank 1/sensor 2]

  4. Check that the resistance is within the specification.

    Specification  : Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals