LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> G90 5.0 Ultimate, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Engine Control System Diagnosis - 3.3L (7 Of 9)) >> DTC P061B-00: Torque Control Signal Failure >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Level 2 monitoring (=Process monitoring)
  1. Poor connection or damaged harness
  2. Faulty ECM (ECM)
Enable Conditions
  • Engine speed during engine start is higher than 32 RPM
Threshold Value
  • When the difference between the calculated torque value and the actual torque value is over 50 to 350Nm
Diagnosis Time
  • 480ms
MIL On Condition
  • 1 driving cycle