LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> G90 5.0 Ultimate, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Engine Control System Diagnosis - 3.3L (5 Of 9)) >> DTC P0345-00: Camshaft Position Sensor 'A' Circuit (Bank 2) >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
Case 1 DTC Strategy
  • Missing signal
  1. Poor connection
  2. Open in harness
  3. CMPS (B2-Intake)
  4. ECM
Enable Conditions
  • First Crankshaft long teeth is passed
Threshold Value
  • No camshaft edge is detected within ten revolutions
Diagnosis Time
  • 2 revs.
Case 2 DTC Strategy
  • Out of range
Enable Conditions
  • First Crankshaft long teeth is passed
Threshold Value
  • Camshaft edge is out of range for more than 6 revolutions
Diagnosis Time
  • 6 revs.
MIL On Condition
  • 2 Drive Cycles