LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> G90 5.0 Ultimate, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Engine Control System Diagnosis - 3.3L (2 Of 9)) >> DTC P00D4-00: HO2S Heater Control Circuit Range/Performance Bank 2 Sensor 2 >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "DTC" button.
  2. Press "DTC Status" button and confirm that "DTC Readiness Flag" indicates "Completed". If not, drive the vehicle within conditions noted in the freeze frame data or Enable Conditions
  3. Read "DTC Status" parameter.
  4. Is parameter displayed "History (Not Present)" displayed?

    YES 

    • System performing to specification at this time. Clear the DTC.

    NO 

    • Go to the applicable troubleshooting procedure.
scientia non olet · About LEMON Manuals