Selection Of Engine Oil
WARNING: This page is about a different variant/trim than selected.
- ACEA A5 or above
Information
- API SL, ILSAC GF-3, ACEA A3 Class engine oil can be used if the recommended engine oil is not available.
Allowed SAE Viscosity
NOTE:
For best performance and maximum protection of all types of operation, select only those lubricants which:
- Satisfy the requirement of the ILSAC (API) or ACEA classification.
- Have proper SAE grade number for expected ambient temperature range.
- Lubricants that do not have both an SAE grade number and ILSAC (API) or ACEA service classification on the container should not be used.