LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> G70 3.3T, RWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake And Exhaust System - 3.3L >> Air Cleaner >> Repair Procedures >> Removal and Installation >> RH Air Cleaner Assembly

RH Air Cleaner Assembly

  1. Disconnect the negative battery terminal.
  2. Remove the RH front strut bar (A).
    G14178940Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the RH air cleaner assembly.
    1. Disconnect the RCV hose (A).
      G14178941Courtesy of HYUNDAI MOTOR AMERICA
    2. Disconnect the air intake hose (B).
    3. Remove the LH air cleaner assembly (A).

      Tightening torque: 

      7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb-ft)

    G14178942Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: After removing and reassembling the RH side air hose (B), check whether the inner perforated pipe is aligned.
    * Reassemble after checking if the perforated pipe's (C) alignment is in disorder due to excessive work during the removal.
    G14178943Courtesy of HYUNDAI MOTOR AMERICA
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals