LH Air Cleaner Assembly
- Disconnect the negative battery terminal.
- Remove the LH front strut bar (A).
- Remove the LH air cleaner assembly.
- Disconnect the RCV hose (A).
- Disconnect the vacumm hose (A).
- Disconnect the breather hose (B).
- Disconnect the air intake hose (C).
- Remove the LH air cleaner assembly (C).
Tightening torque:
7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb-ft)
- Disconnect the RCV hose (A).
- Install in the reverse order of removal.