LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> G70 2.0T, RWD, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Head Up Display Diagnosis >> DTC B1603-00: CAN Bus OFF >> Wiring Inspection >> Terminal and Connector Inspection

Terminal and Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor contact in harness and terminals. Faults can also be caused by interference by other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Was the harness/connector a problem?

    YES 

    1. Repair or replace the harness/connector as necessary, and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    1. Go to "CAN COMMUNICATION CIRCUIT INSPECTION " as below.
scientia non olet · About LEMON Manuals