[2WD Upper Oil Pan]

WARNING: This page is about a different variant/trim than selected.

Remove the sub frame from the vehicle.
Remove the timing chain cover.
(Refer to Timing System - "TIMING CHAIN COVER ")
Remove the lower oil pan.
(Refer to Lubrication System - "OIL PAN ")
Remove the air conditioning compressor.
(Refer to Heating, Ventilation, Air Conditioning - "COMPRESSOR ")
Remove the upper oil pan (A).

Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
- Insert the blade of SST (09215-3C000) between the upper oil pan and lower oil pan.
- Cut off applied sealer and remove the lower oil pan.