Cooling Fan Controller (PWM)

WARNING: This page is about a different variant/trim than selected.

Remove the cooling fan.
(Refer to Cooling System - "COOLING FAN ")
Remove the cooling fan rear cover (A).
Tightening Torque:

4.4 - 4.9 N.m (0.45 - 0.5 kgf.m, 3.2 - 3.6 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Remove the cooling fan motor & controller (A).
Tightening Torque:

6.8 - 8.8 N.m (0.7 - 0.9 kgf.m, 5.1 - 6.5 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
To install, reverse the removal procedure.