LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Timing System - 3.3L) >> Timing Chain >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Set No. 1 Cylinder to top dead center (TDC)/Compression.
    1. Turn the crankshaft pulley clockwise and align its groove with the timing mark "T" of the lower timing chain cover.
      G12656085Courtesy of HYUNDAI MOTOR AMERICA
    2. Check that the mark (A) of the camshaft timing sprockets is in the straight line on the cylinder head surface as displayed in the image. If not, turn the crankshaft clockwise, making one revolution (360°).
      G12656086Courtesy of HYUNDAI MOTOR AMERICA
      NOTE:
      • Do not rotate engine counterclockwise.
  2. Remove the timing chain cover.

    (Refer to Timing System - "TIMING CHAIN COVER ")

    NOTE:
    • Before removing the timing chain, mark the RH/LH timing chain with an identification based on the location of the sprocket because the identification mark on the chain for TDC can be erased.
    G12656087Courtesy of HYUNDAI MOTOR AMERICA
    G12656088Courtesy of HYUNDAI MOTOR AMERICA
    G12656089Courtesy of HYUNDAI MOTOR AMERICA
    G12656090Courtesy of HYUNDAI MOTOR AMERICA
  3. Lower the tensioner link (A), compress the piston of the RH timing chain tensioner, and fix the tensioner with a fixing pin.
    G12656091Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the RH timing chain cam to cam guide (A).
    G12656092Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the RH timing chain auto tensioner (A) and the RH timing chain tensioner arm (B).
    G12656093Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the RH timing chain guide (A).
    G12656094Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the RH timing chain (A).
    G12656095Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the oil pump chain tensioner assembly (A).
    G12656096Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the RH crankshaft chain sprocket (A).
    G12656097Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the oil pump chain sprocket (A) and oil pump chain (B).
    G12656098Courtesy of HYUNDAI MOTOR AMERICA
  11. Remove the crankshaft sprocket (A) (O/P & RH camshaft drive).
    G12656099Courtesy of HYUNDAI MOTOR AMERICA
  12. Install a set pin after compressing the LH timing chain tensioner.
    G12656100Courtesy of HYUNDAI MOTOR AMERICA
  13. Remove the LH timing chain cam to cam guide (A).
    G12656101Courtesy of HYUNDAI MOTOR AMERICA
  14. Remove the LH timing chain auto tensioner (A) and LH timing chain tensioner arm (B).
    G12656102Courtesy of HYUNDAI MOTOR AMERICA
  15. Remove the LH timing chain guide (A).
    G12656103Courtesy of HYUNDAI MOTOR AMERICA
  16. Remove the LH timing chain (A).
    G12656104Courtesy of HYUNDAI MOTOR AMERICA
  17. Remove the crankshaft sprocket (A). (LH camshaft drive)
    G12656105Courtesy of HYUNDAI MOTOR AMERICA
  18. Remove the timing chain auto tensioner assembly adapter (A).
    G12656106Courtesy of HYUNDAI MOTOR AMERICA