LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Timing System - 3.3L) >> Idler >> Repair Procedures >> Inspection >> Drive Belt, Idler, Belt Tensioner Pulley

Drive Belt, Idler, Belt Tensioner Pulley

WARNING: This page is about a different variant/trim than selected.
  1. Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.
  2. Check the belt tensioner for excessive dust, crack, and damage. Replace if necessary.
  3. Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.
  4. Check the pulleys for vibration in rotation, oil or dust deposit of V-ribbed part. Replace if necessary.
scientia non olet · About LEMON Manuals