LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Timing System - 3.3L) >> Front Oil Seal >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the crankshaft pulley.

    (Refer to Timing System - "CRANKSHAFT PULLEY ")

  2. Remove the timing chain cover oil seal (A).
    G12656073Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals