LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Timing System - 3.3L) >> Front Oil Seal >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Using SST (09231-3C100), install timing chain cover oil seal.
    G12656074Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Always use a new oil seal.
  2. Install the crankshaft damper pulley.

    (Refer to Timing System - "CRANKSHAFT PULLEY ")

scientia non olet · About LEMON Manuals