Removal And Installation
WARNING: This page is about a different variant/trim than selected.
- Remove the drive belt.
(Refer to Timing System - "DRIVE BELT ")
- Remove the drive belt auto tensioner (A).
Tightening Torque
Bolt (B):
81.4 - 85.3 N.m (8.3 - 8.7 kgf.m, 60.0 - 62.9 lb-ft)
Bolt (C):
17.7 - 21.6 N.m (1.8 - 2.2 kgf.m, 13.0 - 15.9 b-ft)
- Install in the reverse order of removal.