LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission Control System (SBC) - 3.3L) >> Transmission Control Module (TCM) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Input oil-pressure characteristics received backup in new TCM.
    G12663941Courtesy of HYUNDAI MOTOR AMERICA
    G12663942Courtesy of HYUNDAI MOTOR AMERICA
    G12663943Courtesy of HYUNDAI MOTOR AMERICA
    G12663944Courtesy of HYUNDAI MOTOR AMERICA
    G12663945Courtesy of HYUNDAI MOTOR AMERICA
  3. Perform the TCM Adaptive Values Learning Procedure.

    (Refer to Automatic Transaxle Control System - "REPAIR PROCEDURES ")

scientia non olet · About LEMON Manuals