LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission Control System (SBC) - 3.3L) >> Output Speed Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check Signal Waveform of Output Speed Sensor using the GDS.

    Specification:  Refer to "SIGNAL WAVEFORM" below.

    f<1000Hz D
    G12663957Courtesy of HYUNDAI MOTOR AMERICA
    R
    G12663958Courtesy of HYUNDAI MOTOR AMERICA
    f> 1000Hz D
    R
    G12663959Courtesy of HYUNDAI MOTOR AMERICA
    Pulse
    Width    		 t1 (D): 60μs (50 - 70us)
    t2 (R): 120μs (102 - 138us)
    t3: 30μs (24 - 36us)
scientia non olet · About LEMON Manuals