LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission Control System (SBC) - 3.3L) >> Input Speed Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check Signal Waveform of Output Speed Sensor using the GDS.

    Specification:  Refer to "SIGNAL WAVEFORM" below.

    G12663969Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals