LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Control System - 3.3L) >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal >> [CVVT Oil Control Valve (Exhaust)] >> [Bank 2]

[Bank 2]

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the CVVT oil control valve connector (A).
    G12663744Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the Cylinder Head Cover.

    (Refer to Engine Mechanical System - "CYLINDER HEAD ASSEMBLY ")

  4. Remove the CVVT oil control valve from the engine, after removing the bolts (A).
    G12663745Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals