LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Cylinder Head Assembly - 3.3L) >> Camshaft >> Repair Procedures >> Removal >> RH Intake And Exhaust Camshaft

RH Intake And Exhaust Camshaft

WARNING: This page is about a different variant/trim than selected.
  1. Remove the Timing Chain.

    (Refer to Timing System - "TIMING CHAIN ")

  2. Remove the RH exhaust camshaft oil control valve (OCV) (A).
    G12656171Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the RH camshaft bearing cap (A) and thrust bearing cap (B).
    G12656172Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the RH camshaft assembly (A).
    G12656173Courtesy of HYUNDAI MOTOR AMERICA