LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Cylinder Head Assembly - 3.3L) >> Camshaft >> Repair Procedures >> Removal >> LH Intake And Exhaust Camshaft

LH Intake And Exhaust Camshaft

WARNING: This page is about a different variant/trim than selected.
  1. Remove the Timing Chain.

    (Refer to Timing System - "TIMING CHAIN ")

  2. Remove the fuel pump bracket (A).
    G12656167Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the LH exhaust camshaft oil control valve (OCV) (A).
    G12656168Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the LH camshaft bearing cap (A) and thrust bearing cap (B).
    G12656169Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the LH camshaft assembly (A).
    G12656170Courtesy of HYUNDAI MOTOR AMERICA