LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Cylinder Head Assembly - 3.3L) >> Camshaft >> Repair Procedures >> Installation >> Notes

Repair Procedures: Installation: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Be careful when assembling the right/left bank, intake/exhaust side.
  • Assemble the key groove of camshaft rear side to the same level of head top surface.
  • Apply a light coat of engine oil on camshaft journals.

[Intake Camshaft] 

G12656183Courtesy of HYUNDAI MOTOR AMERICA

As for camshaft identification, refer to the Chart below.

Displacement Left Bank Right Bank
3.3L
  1. 30 mm (1.1811 in.)
  2. 30 mm (1.1811 in.)
  3. 30 mm (1.1811 in.)
  4. 30 mm (1.1811 in.)
  5. 27 mm (1.0630 in.)
  1. 30 mm (1.1811 in.)
  2. 30 mm (1.1811 in.)
  3. 30 mm (1.1811 in.)
  4. 27 mm (1.0630 in.)
  5. 30 mm (1.1811 in.)

[Exhaust Camshaft] 

G12656184Courtesy of HYUNDAI MOTOR AMERICA

As for Camshaft Identification, refer to the Chart below.

Displacement Left Bank Right Bank
3.3L
  1. -
  2. -
  3. 24 mm (0.9448 in.)
  4. -
  5. -
  1. 30 mm (1.1811 in.)
  2. 30 mm (1.1811 in.)
  3. 30 mm (1.1811 in.)
  4. 30 mm (1.1811 in.)
  5. -
scientia non olet · About LEMON Manuals