LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Cylinder Head Assembly - 3.3L) >> CVVT Assembly >> Repair Procedures >> Removal >> Continuous Variable Valve Timing (CVVT)

Continuous Variable Valve Timing (CVVT)

WARNING: This page is about a different variant/trim than selected.
  1. Remove the timing chain.

    (Refer to Timing System - "TIMING CHAIN ")

  2. Remove the CVVT assembly.
    1. LH exhaust CVVT
    2. LH intake CVVT
      G12656159Courtesy of HYUNDAI MOTOR AMERICA
    3. RH intake CVVT
    4. RH exhaust CVVT
      G12656160Courtesy of HYUNDAI MOTOR AMERICA
      NOTE:
      • When removing the CVVT assembly bolt, prevent the camshaft from rotating by using a wrench at position (A).
        G12656161Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals