LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Fuel Delivery System - 3.3L) >> Accelerator Pedal >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the mounting nut (C) after removing the top cap (B).
  4. Remove the mounting bolt (E) after removing the Lower cap (D).
    G12663860Courtesy of HYUNDAI MOTOR AMERICA
    G12663861Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals