LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Cylinder Head Assembly - 2.0L) >> Cylinder Head >> Repair Procedures >> Disassembly

Repair Procedures: Disassembly

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Identify mechanical lash adjuster (MLA), valves, valve springs as they are removed so that each item can be reinstalled in its original position.
  1. Remove the MLAs (A).
    G13538809Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the valves.
    1. Using SST (09222-3K000, 09222-3K100), compress the valve spring and remove retainer lock.
      G13538810Courtesy of HYUNDAI MOTOR AMERICA
    2. Remove the spring retainer.
    3. Remove the valve spring.
    4. Remove the valve.
    5. Using needle-nose pliers, remove the valve stem seal.
      NOTE:
      • Do not reuse old valve stem seals.
scientia non olet · About LEMON Manuals