LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Cooling System - 2.0L) >> Water pump >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary.
  2. Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary.
  3. Check for coolant leakage. If coolant leaks from hole, the seal is defective.

    Replace the coolant pump assembly.

    NOTE:
    • A small amount of seepage from the bleed hole is normal.
scientia non olet · About LEMON Manuals