LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Cooling System - 2.0L) >> Cooling Fan >> Repair Procedures >> Inspection >> Fan Motor

Fan Motor

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the fan motor connector from the cooling fan controller (PWM).
  2. Connect the battery voltage to the "+" terminal and ground to "-" terminal.
  3. Check the cooling fan motor operates well.