LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Engine Control System Diagnosis - 2.0L (1 Of 4)) >> DTC P0125-00: Insufficient Coolant Temperature For Closed Loop F/Control >> System Inspection >> Thermostat Inspection

Thermostat Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check if the thermostat bypass valve is stuck in the open position or if the correct type of thermostat was installed. Replace thermostat as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
  2. Check the valve opening temperature of the thermostat.

    Specification:  80~84°C (176~183° F)

  3. If the opening temperature is not as specified, Replace thermostat as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure. If it is okay, go to next step below.
scientia non olet · About LEMON Manuals