LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Engine Control System Diagnosis - 2.0L (1 Of 4)) >> DTC P0108-00: Manifold Absolute Pressure/Barometric Pressure Circuit High Input >> DTC Inspection >> GDS Data Analysis

GDS Data Analysis

WARNING: This page is about a different variant/trim than selected.
  1. Connect GDS and select "DTC Analysis" mode.
  2. Warm up the engine.
  3. Monitor the parameters related to DTC on the "Current Data" menu of the GDS below while pressing and depressing accelerator pedal.
  4. Is parameter displayed within specifications?

    YES 

    • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Go to next procedure.
scientia non olet · About LEMON Manuals