LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Engine Control System Diagnosis - 2.0L (1 Of 4)) >> DTC P0011-00: 'A (Intake)' Camshaft Position-Timing Over-Advanced Or System Performance (Bank 1) >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
Case 1 Main Action
  • Deviation check between actual CAM position and CAM set point position in case of changing set point (Intake CVVT slow response)
  1. CVVT Assembly
Prerequisite condition
  • Camshaft set point movement is greater than 16°CRK within shorter than 1.5 seconds.
  • Camshaft set point since engine starts is moved more than 0 times.
  • Battery voltage is between 11V and 16V.
  • Engine speed is between 600 to 1500 and 5000 rpm.
  • Engine oil temperature model is between 20°C (68°F) and 120°C (248°F)
Threshold Value
  • CAM position movement within 1.52 seconds is less than 4°CRK.
Case 2 Main Action
  • Deviation check between actual CAM position and CAM set point position (Intake CVVT steady deviation)
Prerequisite condition
  • Elapsed time after engine start is longer than 1.5 seconds.
  • Camshaft set point since engine starts is moved more than 0 times.
  • Camshaft set point is 3°CRK away from full retarded position.
  • Engine speed is between 600 to 1500 and 5000 rpm.
  • Engine oil temperature model is between 20°C (68°F) and 120°C (248°F).
  • Battery voltage is between 11V and 16V.
Threshold Value
  • The absolute value of difference between Camshaft position actual value and set point is greater than 85° CRK/second.
Diagnosis Time
  • Immediately
MIL On Condition
  • 3rd Driving Cycle
scientia non olet · About LEMON Manuals