LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Idle Stop & Go (ISG) System - 2.0L) >> Brake Booster Vacuum Pressure Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check for loose connection of BBCPS and vacuum hose, and damage of vacuum hose.
  2. Connect KDS to DLC (Data Link Cable).
  3. Warm up the engine to normal operating temperature.
  4. Monitor "BBVPS" parameter on KDS.
scientia non olet · About LEMON Manuals