LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Clutch System) >> Clutch Master Cylinder >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install reverse the removal procedures.
  2. After be equipped, perform bleeding air procedure in concentric slave cylinder after pouring the brake fluid.

    (Refer to Clutch System - "CONCENTRIC SLAVE CYLINDER ASSEMBLY ")

  3. After installation, bleed the brake system.

    (Refer to Brake System - "BRAKE BLEEDING PROCEDURES ")

scientia non olet · About LEMON Manuals