LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G80 3.8, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Head Up Display Diagnosis >> DTC B1602-00: CAN Line Error (C-CAN) >> Wiring Inspection >> Signal Circuit Inspection >> Notes

Signal Circuit Inspection: Notes

  1. Connect all unit/module's connector.
  2. IG Key "ON", Engine "OFF".
  3. Perform "Oscilloscope" procedure in the "Diagnosis" with GDS as follows.
  4. Measure the Signal Waveform between "C_CAN High" terminal of HUD ("HEAD-UP DISPLAY") harness connector and chassis ground.
  5. Measure the Signal Waveform between "C_CAN LOW" terminal of HUD harness connector and chassis ground.
scientia non olet · About LEMON Manuals