Repair Procedures: Replacement: [LH]

CAUTION:

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Take care not to bend or scratch the trim and panels.

Remove the crash pad lower panel.
(Refer to Crash Pad - "CRASH PAD LOWER PANEL ")
After loosening the mounting bolts, remove the crash pad under cover [LH] (A).

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the under lamp (A) and knee air bag connector (B).

Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, remove the crash pad under cover (A).

Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Make sure the connector is connected properly.
- Replace any damage clips.