LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2017 >> G80 5.0 Ultimate >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Lumbar Bolster Diagnosis >> DTC B2472-00: SLB Motor Fail >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Conditions for setting DTC Possible Cause
DTC Strategy
  • Check SLB function operating status
  1. Motor output circuit open
  2. Motor output circuit short
  3. Motor output circuit overcurrent
  4. Faulty motor
Enable Conditions
  • IG key "OFF"→ "ON"
  • Lumbar bolster S/W reset
Threshold Value
  • Lumbar bolster pump motor does not operate
Diagnostic Time
  • Immediately
Fail safe
  • Motor does not operate until the failure is solved
DTC Erasing
  • Erased DTC after solved problem
scientia non olet · About LEMON Manuals