Repair Procedures: Replacement

CAUTION:

Put on gloves to prevent hand injuries.

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Take care not to bend or scratch the trim and panels.

Lower the steering wheel.
Using a screwdriver or remover, remove the steering column shroud upper panel (A).

Courtesy of
Using a screwdriver or remover, remove the cluster facia upper panel assembly (A).

Courtesy of
After loosening the mounting screw, remove the cluster facia panel (A).

Courtesy of
Install in the reverse order of removal.

information

Replace any damage clips.