LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair Procedures >> Inspection >> Notes

Repair Procedures: Inspection: Notes

  1. Check point (Warning indicator)
    NOTE: Fault conditions and normal operating conditions, refer to the owner's manual.
    No Ref Symbol Name Color Signal Input Signal Control Check Point
    1
    G11342358
    		 Turn signal (Left) Green CAN SJB (Gateway)
    1. Multifunction switch
    2. BCM
    3. SJB
    4. CAN failure
    2
    G11342359
    		 Turn signal (Right) Green CAN SJB (Gateway)
    1. Multifunction switch
    2. BCM
    3. SJB
    4. CAN failure
    3
    G11342360
    		 Tail Lamp Green CAN SJB (Gateway)
    1. Multifunction switch
    2. BCM
    3. SJB
    4. CAN failure
    4
    G11342361
    		 Fog Lamp Green CAN SJB (Gateway)
    1. Multifunction switch
    2. BCM
    3. SJB
    4. CAN failure
    5
    G11342362
    		 High Beam Blue CAN SJB (Gateway)
    1. Multifunction switch
    2. BCM
    3. SJB
    4. CAN failure
              BSD
    1. BSD System
    2. CAN failure
              PSB
    1. PSB System
    2. SJB
    3. CAN failure
    6
    G11342363
    		 Warning Yellow CAN + Hard-wired SCC ECS
      1. SCC System
      2. AEB System
      3. LDWS System
      4. AHLS System
      5. TPMS System
      6. HSWS System
    2. CAN failure
              Low Washer
    1. Washer fluid lever sensor
    2. Wiring failure
              Digital Input Reminders when service checks
    7
    G11342364
    		 Battery Charge Red Hard-wired Alternator
    1. Alternator
    2. Wiring Failure
    3. Battery
    8
    G11342365
    		 Oil Pressure Red Hard-wired ECM
    1. Oil pressure sensor
    2. Wiring Failure
    3. ECM
    4. CAN failure
    9
    G11342366
    		 Check Engine Yellow CAN ECM
    1. ECM
    2. CAN failure
    10
    G11342367
    		 Immobilizer Yellow CAN + Hard-wired SJB (Gateway)
    1. SMK System
    2. SJB
    3. CAN failure
    4. Hard-wired
    11
    G11342368
    		 Parking Brake Fluid EBD EPB EVP Red CAN SJB (Gateway) EBD EPB
    1. IGPM
    2. VDC System
    3. EPB System
    4. CAN failure
    5. Parking Brake Switch
    6. Brake Oil lever sensor
    12
    G11342369
    		 ABS Yellow CAN ABS
    1. VDC System
    2. CAN failure
    13
    G11342370
    		 ESC Yellow CAN TCS
    1. VDC System
    2. CAN failure
    14
    G11342371
    		 ESC Off Yellow CAN TCS
    1. VDC System
    2. CAN failure
    15
    G11342372
    		 EPB Yellow CAN EPB
    1. EPB System
    2. CAN failure
    16
    G11342373
    		 Auto Hold White Yellow Green CAN VDC
    1. VDC System
    2. CAN failure
    17
    G11342374
    		 Seat Belt Red CAN SJB (Gateway)
    1. SJB
    2. CAN failure
    18
    G11342375
    		 Airbag Red CAN SRSCM
    1. SRSCM System
    2. CAN failure
    19
    G11342376
    		 EPS (MDPS) Red CAN MDPS
    1. MDPS Unit system
    2. MDPS Motor
    3. CAN failure
    20
    G11342377
    		 TPMS Yellow CAN TPMS
    1. TPMS System
    2. TPMS
    3. CAN failure
    21
    G11342378
    		 LDWS Green Yellow White CAN LDWS
    1. LDWS System
    2. CAN failure
    22
    G11342379
    		 4WD Yellow CAN 4WD
    1. 4WD ECU
    2. CAN failure
    23
    G11342380
    		 Fuel Warning Yellow Direct (Micom) Fuel Segment
    1. Fuel Segment Failure
    2. Wiring Failure
    24
    G11342381
    		 Door Open Red CAN SJB (Gateway)
    1. SJB
    2. CAN failure
    3. Door Sensor/switch
    25
    G11342382
    		 Trunk Open Yellow CAN SJB (Gateway)
    1. SJB
    2. CAN failure
    3. Trunk Module
    26
    G11342383
    		 ECO Green CAN ECO Mode
    1. Drive Mode Switch
    2. ECM System
    3. TCU System
    27
    G11342384
    		 SPORT Yellow CAN SPORT Mode
    1. Drive Mode Switch
    2. ECM System
    3. TCU System
    28
    G11342385
    		 SNOW White CAN SNOW Mode
    1. Drive Mode Switch
    2. ECM System
    3. TCU System
    29
    G11342386
    		 AEB Yellow CAN AEB Fail
    1. SCC System
    2. CAN failure
  2. Check point (Gauge)
    No Name Signal Input Signal Control (Unit/Sensor) Check Point
    1 Speedometer C-CAN TCU 1) CAN Line failure
    3 Tachometer C-CAN EMS 1) CAN Line failure
    4 Cooling water temperature C-CAN EMS 1) CAN Line failure
            1) Fuel sender failure
    5 Fuel Hardwire Fuel Sander 2) Wiring failure
    6 Shift lever indicator C-CAN TCU 1) CAN Line failure
    7 Compass MM-CAN HU 1) CAN Line failure
    8 Outside temperature C-CAN DATC 1) CAN Line failure
  3. Other cluster check list
    1. USM (User Setting Mode)

      USM setting process (mode: 24)

      Setting can be changed by using the buttons of the steering switch. The items include In/out Seat Synchronization, vAuto Door Lock, Auto Door Lock Deactivate, Head Lamp Escort, Welcome Light, Welcome Sound, Triple Turn Signal, Average Fuel Consumption Auto Reset, HUD Height Adjustment, Brightness, and Content Setup. These items can be set and changed.

scientia non olet · About LEMON Manuals