Pinion Shaft Seal: Remove & Replace
WARNING: This page is about the Sierra 3500 HD AT4, 6.6L Eng VIN 7, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Lower,Both,w/o Variable Assist Steering | Includes: R&I Steering Gear Assembly. Includes: R&I Fender Liner. Includes: Bleed Power Steering System. Includes: Adjust toe-in. | 2.8 | B | |
| Lower,Both,w/Variable Assist Steering,RPO NV8 | Includes: R&I Steering Gear Assembly. Includes: R&I Fender Liner. Includes: Bleed Power Steering System. Includes: Adjust toe-in. | 2.9 | B | |
| Additional Procedure: PINION SHAFT SEAL: Remove & Replace: | ||||
| Where Skid Plate interferes add | 0.2 | B | ||
| Combination Procedure: STEERING ANGLE SENSOR: Reset: | ||||
| Includes: Steering Angle Sensor Centering procedure. | 0.2 | B | ||
| Combination Procedure: STEERING GEAR: Adjustment: | ||||
| 0.2 | B | |||