Automatic Transmission Fluid Pump Cover Disassemble

WARNING: This page is about a different car, the 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
CAUTION: After cleaning the transmission components, allow to air dry. Do not use cloth or paper towels in order to dry any transmission components. Lint from the towels can cause component failure. CAUTION: Do not reuse cleaning solvents. Previously used solvents may deposit sediment which may damage the component. Preliminary Procedure Clean and inspect all components for wear and/or damage.
1	Automatic Transmission Fluid Pump Cover Bolt M6 x 25 (Qty: 5)
2	CAUTION: When removing the automatic transmission fluid pump to service the automatic transmission fluid pump gasket and automatic transmission fluid pump seal, be certain that the fluid pump is removed with the automatic transmission fluid pump cover facing up and the fluid pump down, so that the internal components remain contained within the fluid pump housing. If the components are removed and then installed incorrectly in the housing, damage to transmission internal components can occur. Automatic Transmission Fluid Pump Assembly
3	Automatic Transmission Fluid Pump Gasket NOTE: DISCARD the gasket.
4	Automatic Transmission Fluid Pump Pressure Plate Seal NOTE: DISCARD the seal.
5	Automatic Transmission Fluid Pump Seal NOTE: DISCARD the seal.