Drive and Driven Sprocket, Drive Link, and Park Pawl Removal
WARNING: This page is about a different car, the 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Drive Sprocket Thrust Washer (4) - Remove
- Driven Sprocket Assembly, Drive Sprocket and Park Gear Assembly and Drive LinkNOTE:
- The drive link, drive, and driven sprocket assemblies must be removed at the same time.
- The driven sprocket ball bearing inner race has a slight interference fit with the case. Pull straight up to ease removal.
- Drive Sprocket Bearing (2) - Remove
- Driven Sprocket Bearing (1) - Remove
Drive Link Lubricant Scoop (3) - Remove
- Drive Link Lubricant Fluid Seal (2) - Remove
- Drive Link Lube Scoop Seal (1) - Remove
Front Differential Carrier Baffle Bolt (2) - Remove - M6 x 16 [2x]
- Front Differential Carrier Baffle (1) - Remove
Park Pawl Spring (3) - Remove
- Park Pawl Shaft (2) - Remove
- Park Pawl (1) - Remove