Component Testing
WARNING: This page is about a different car, the 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the B280 Automatic Transmission Accumulator Solenoid Valve.
- Test for 16 - 20 Ω between relay terminals 1 and 2.
- If not between 16-20 Ω
Replace the B280 Automatic Transmission Accumulator Solenoid Valve.
- Go to next step: If between 16-20 Ω
- If not between 16-20 Ω
- Test for infinite resistance between terminal 1 and the B280 Automatic Transmission Accumulator Solenoid housing.
- If not infinite resistance
Replace the B280 Automatic Transmission Accumulator Solenoid Valve.
- Go to next step: If infinitive resistance
- If not infinite resistance
- All OK.