Circuit/System Testing
WARNING: This page is about a different car, the 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the condition does not exist: Incorrect pressure - Refer to: Line Pressure Check , & Solenoid Valve Pressure
- If a condition exists
Refer to: Fluid Pressure High or Low
- Go to next step: If no condition exists
- If a condition exists
- Ignition/Vehicle - Off
- Remove the component: Q8 Control Solenoid Valve Assembly
- Verify the procedure/test passes. - Refer to: Control Solenoid Valve and Transmission Control Module Assembly Inspection
- If the procedure/test does not pass
Replace the component: Q8 Control Solenoid Valve Assembly
- Go to next step: If the procedure/test passes
- If the procedure/test does not pass
- Refer to: Diagnostic Fault Information