Removal Procedure
WARNING: This page is about a different car, the 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Prior to removing the transmission rear strut, mark the transmission rear strut fasteners to transmission rear strut to sub frame interfaces using spray paint or a marker for correct positioning during installation.
- Remove the two piece propeller shaft. Two-Piece Propeller Shaft Replacement
- Using a suitable jack stand, support the rear of the powertrain.
Remove and DISCARD the transmission rear strut through bolt (2).
- Remove and DISCARD the transmission rear strut to drivetrain and front suspension cradle bolt (1).
- Remove the transmission rear strut (3).