Installation Procedure
WARNING: This page is about a different car, the 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Install the left transmission mount (4) to the vehicle.
- Install the transmission mount to body bolts (5) and tighten to 100 N.m (74 lb ft).
- Install the NEW left transmission mount to transmission bolt (1) and initially tighten to 35 N.m (26 lb ft).
- Install the NEW left transmission mount to transmission bolt (2) and initially tighten to 35 N.m (26 lb ft).
- Install the NEW left transmission mount to transmission bolt (3) and initially tighten to 35 N.m (26 lb ft).
- Tighten left transmission mount to transmission bolts (1-3) to 100 N.m (74 lb ft) plus 60 - 75 degrees, using the EN-45059 meter.
- Remove the transmission jack.
- Install the battery tray. Battery Tray Replacement .
CAUTION:
Refer to Fastener Caution .
CAUTION:
Refer to Torque-to-Yield Fastener Warning .