Installation Procedure

WARNING: This page is about a different car, the 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Position the transmission control bracket in the vehicle.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Install the automatic transmission control nuts (2) to the automatic transmission control bracket (3) and tighten to 9 N.m (80 lb in).
Install the left instrument panel center support bracket bolt (1) and tighten to 22 N.m (16 lb ft).
Courtesy of GENERAL MOTORS COMPANY

Install the right instrument panel center support bracket bolt (1) and tighten to 22 N.m (16 lb ft).
Transmission control - Install - Transmission Control Replacement